INSTRUCTIONS FOR H-3850 LIGHT KIT

Congratulations on your purchase. Here are the basic instructions for making the light kit adaptable to fit your individual needs.

The first step to remove the item from the package. First you tighten down the knob as snug as you want it to be when the light is on. Then you take your Allen wrench and tighten the set screw that is in the knob until the blue light comes on. Then you turn the knob back a quarter turn and the light will go off. If the knob rattles or is too loose when you back the knob off, back the set screw off a quarter turn and that should take care of the problem.

You then screw the light kit into the threaded hole that is on the pin guard and you should be ready to shoot.